Operation - Klarstein KRAFTWERK ECO SMART 11 Bedienungsanleitung

EN
36

OPERATION

Switching the unit on/off
Press the On/Off button, the unit starts in automatic mode.
Automatic mode
In automatic mode, the unit can cool or ventilate depending on the ambient
temperature and setpoint setting. The unit is preset as follows:
• Default setting in automatic mode: If the ambient temperature is above 25 °C,
the unit is in automatic cooling mode and runs according to the set setpoint
(default setting: 24 °C). During operation, the "automatic mode" and "cooling
mode" indicators light up.
• In automatic cooling mode, the fan speed setting is ineffective, the unit selects
the fan speed automatically.
• If the ambient temperature is less than or equal to ( < ) 25 °C, the unit runs in
automatic fan mode. The "automatic mode" and "fan mode" indicators light
up. In automatic fan mode, the fan speed can be set manually.
• The indicators of the current functions light up simultaneously. The display
shows the room temperature from 0 °C to 50 °C.
• To switch off the device, press the On / Off button again.
Note: To prolong the life of the compressor, please wait at least 3 minutes after
switching off the unit before switching it on again.