Getting Started - Klarstein Iceblock Prosmart 9 Bedienungsanleitung

EN
28

GETTING STARTED

1. Select a location where there is a power connection nearby.
2. Install the exhaust hose as shown in the two illustrations below and adjust the
position of the window.
3. Connect the exhaust hose as shown in the illustration with the exhaust hose (see
figure below) (only for models with integrated heater).
4. Plug the mains plug into a grounded AC 220 - 240 V~ (50/60 Hz) socket.
5. Press the power button to turn on the device.
Drain hose