Klarstein Iceblock Prosmart 9 Bedienungsanleitung Seite 30

EN
30
Dehumidification
• Press the Mode button until the dehumidification icon appears on the screen.
• The temperature is automatically set to 2 ° C less than the room temperature.
• The speed of the fan motor is automatically set to low.
Fa
• Press the Mode button until the fan symbol appears on the screen.
• Press the Speed button to select the fan speed.
Timer operation
Automatic switch-on time:
• When the unit is off, press the TIMER button and select the desired on-time.
• 'Preset ON Time' will be displayed on the screen.
• The switch-on time can be selected as desired (00:00 - 24:00).
Automatic switch-off time
• When the unit is turned on, press the TIMER button and select the desired off time.
• 'Preset OFF Time' will be displayed on the screen.
• The switch-off time can be selected as desired (00:00 - 24:00).
Panning movement
• Press this button after turning on the unit. The device will then move automatically
from left to right.
• If you press the button again, the movement will be stopped and the ventilation
grille of the device will remain in this position.
Snooze
• Press the Sleep button to set the temperature when the unit is in cooling mode. After
one hour the temperature will be raised by 1 ° C. After 2 hours the temperature will
be raised by 2 ° C.
• Press the Sleep button to set the temperature when the appliance is in heating
mode. After one hour, the temperature will be lowered by 1 ° C. After 2 hours the
temperature will be lowered by 2 ° C.
• Press the button again to cancel the setting.