Kaiser EH Serie Gebrauchsanweisung Seite 44

1
5
44
2
2 3
8 9 10
7
6
EN
Pyrolytic self-cleaning function
• Press and turn the rotary knob 1
in standby mode to choose a po-
sition 2, F-10.
The symbol 3,
flashes.
• Press the knob 4 to confirm.
The display 5 flashes to indicate
the default operation time is 1
hour. The symbol 6, h lights up.
• Turn the rotary knob 4 to set the
hours then press it to proceed the
minutes' adjustment.
The symbol 7, min lights up.
• Turn the rotary knob 4 to set the
minutes then press it to finish the
setting of the self-cleaning time.
The self-cleaning function starts to
run, the symbols 8, 9, 10 light up.
The display shows the remaining
operating time.
The default temperature is 420 °C.
The duration of the self-cleaning
process can be set from 1 to 3
hours.
The pyrolytic self-cleaning func-
tion will always be carried out
when the oven door is closed. The
oven door is locked during the pro-
cess.
If terminating the operation of
the pyrolytic self-cleaning func-
tion is necessary:
• Press and hold the knob 1 for 3
seconds.
Upon termination of the self-clean-
ing function, the door remains
locked until the temperature in the
oven chamber drops to 280 °C.