Operation; Checking The Battery Charge Level; Inserting / Removing The Device's Battery Pack - Parkside PBSA 20-Li A1 Originalbetriebsanleitung

tool may come into contact with
hidden wiring. Contact with a live
wire can also cause a charge in metal
parts of the appliance and result in an
electric shock.
j) Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-
ting tool may come into contact
with hidden wiring or its own
cord. If the screw were to come into
contact with a live electrical cable,
metal parts of the appliance could
also become live and cause an electric
shock.
7) reSIDUaL rISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Warning! Observe the safety
information in the operating
instructions for your Parkside
X 20 V Team series recharge-
able battery.
Only use chargers belonging
to the Parkside X 20 V TEAM
series to recharge the batte-
ry. there is a risk of fire and
explosion.

Operation

Checking the battery charge
level
The battery's ( 12) charge level is indi-
cated by the charge state indicator (
The LEDs indicate the battery's charge
level, when the device is in operation.
To do this, press the softkey (
the charge level indicator (
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red
=> Battery needs
Inserting / removing the
device's battery pack
Inserting the battery pack:
• Move the rotation direction
switch (
setting (lock). Slide the foot of
the device onto the battery pack
( 11) until it clicks into place.
GB IE NI
12a) of
12).
to be charged
6) onto its middle
11).
9