Safety - General Warnings - Dibo ECN Serie Gebrauchsanweisung

1. Safety - General warnings

General:
The DiBO high pressure cleaner is a cleaner, which produce a water jet under high pressure. The cleaner can
be exclusively used by persons who have been instructed in the service of it and explicitly with the service of it
have been charged. For this reason a complete knowledge of this guide is necessary to avoid damage to your-
self, third parties, objects or to the machine self. The machine is not suitable for use by children! If the machine
is used by other persons than you must as an owner inform the user of the safety regulations.
The use of the high pressure cleaner falls under the applying national provisions.
Beside the instructions for use and in the country where the machine is used applying, binding regulations
concerning accidents prevention, also the recognised technical rules for safely and judicious work must be
observed.
Each working method which can be dangerous for the security, must be avoided.
High pressure hoses:
High pressure hoses, fi ttings and joints are important for the security of the machine.
Use only by the manufacturer approved high pressure parts! Do not use the high pressure hose as an draft
cable.
Maximal submitted working pressure and temperature are printed one the high pressure hose.
Spray with high pressure jet:
The high pressure jet can be dangerous if she is abused. The jet cannot be aimed on yourself, persons, animals,
installations under electric tension or at the machine itself.
Electric installations never spray with water: danger for persons, short circuit danger.
Carry security clothing, security optical device and hearing protection!
Sensitive parts not cleaning with the point jet. At cleaning pay attention to suffi ciently distance between the high
pressure sprinkler and the surface to avoid a damage of the surface to clean.
During the use keep all protective coverings and doors of the machine closed.
Defi ne the spray array clearly and provide a delimited distance with minimum 6 m around the spray array. Re-
move all loose elements within the spray array, they could blow away.
Never spray from an unstable duty station (ladder, small boat, wharf...).
During working with the machine repercussion strengths appear to the lance.
If the lance stand slanting, moreover occur a turn moment. For this reason hold the lance with both hands.
Spray lance:
Stop the engine, if the spray lance must be exchanged.
Make sure the protective cap (synthetic seal) is covering the sprinkler nozzle.
Fix the lance coupling fi rmly to the gun.
Don't block the handle of the spray gun when the spray gun is in use.
Machine:
Never take the machine in use without water. Even a brief lack of water can lead to serious damages!
When the machine is connected to the drinking water supply, the existing regulations about that must be ob-
served ( EN 1717 ). The machine must stand on a stable horizontal base with the brake on!
Work at artifi cial light: if daylight offers not suffi cient visibility during the use, the use of adapted impermeable
lighting armature+ stretches to recommendation. In spaces provide with standard lighting these must remain on
wide distance of the water jet. Never work during a storm outdoors.
Fixed adjustments of the machine can be modifi ed under no circumstances himself. The high pressure cleaner
has been made in running order and tested by DiBO according to the safety standards.
Never solvent holding fl uids such as petrol, oil or dilution suck in, the arisen spray veil can be extremely infl am-
mable and/or toxic.
When the machine is in use these can never be left behind unattended.
Pay attention to suffi cient ventilation. Machine does not cover or use in spaces with insuffi cient ventilation!
Water outlet:
See for a sound and smooth water outlet of the effl uent.
If there is cleaned with detrimental chemicals or when the object to clean is strongly polluted, the effl uent must
be purifi ed before draining this in the sewer.
DiBO n.v. 35