7.3.2
Installation with tensile force adapter and knuckle eye
If the transducer is to be tensile force loaded, it can be mounted with an
adapter (HBM accessory) and a knuckle eye. A centering hole is located on
both sides of the transducer.
When knuckle eyes are used, the breaking force is reduced to 150 %. Knuckle
eyes are only suitable for use with quasi‐static loading (alternating loads
v10 Hz).
Installation with flange through‐hole
M
A
Installation with knuckle eyes
Fig. 7.2
Installation for tensile loading
U5
provided by customer
Tensile force adapter
Lock nut (M
Knuckle eye ZGUW
Bearing plate
A00809_08_Y00_01 HBM: public
Installation with flange thread
M
A
)
B
Lock nut (M
)
B
Tensile force adapter
M
A
M
A
Lock nut (M
Knuckle eye ZGUW
Mechanical installation
provided by customer
Tensile force
adapter
Lock nut (M
Knuckle eye ZGUW
)
B
)
B
13