Mechanical installation
Nominal force
(kN)
100
200
500
1)
secured with 2 screws to prevent torsion
Attaching the knuckle eye
S Screw the correct adapter (dependent on nominal force!; see Chapter 3) to
U5 (taking screw length into account)
S Turn the lock nut back as far as the eye
S Screw the knuckle eye into the adapter as far as the stop
S Unscrew knuckle eye 1 to 2 turns and align
S Load eye with nominal load
S Tighten lock nut (M
CAUTION
When locking with the lock nut, under no circumstances let the torque be trans
mitted through the transducer.
14
H1 (mm) H2 (mm) Starting torque
app.159
app. 269
app. 203 app. 351
app. 319 app. 575
, lock using the flat of the adapter)
B
A00809_08_Y00_01 HBM: public
Starting torque
M
(NVm)
A
115
280
560
M
(NVm)
(mm)
B
1900
app. 15
4300
app. 19
1
-
)
app. 23
T
U5