Herunterladen Diese Seite drucken

Operating The Appliance; Function Switch; Temperature Control; Timer - Silvercrest SGB 1200 B5 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SGB 1200 B5:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Operating the appliance

Function switch

You can switch on the appliance using the function
switch 4, and can also set three different functions:
Symbol
OFF
The appliance is switched off .

Temperature control

Use the temperature control 2 to set the
desired temperature .

Timer

User the timer 6 to set the cooking time .
Set the timer 6 to the desired cooking time .
The red control lamp 5 lights up . Once the
set time has elapsed, you will hear a beep and
the appliance stops heating . The red control
lamp 5 goes out .
NOTE
You can also use the timer 6 as a short-period
timer without the heating function .
Set the function switch 4 to
Set the desired time on the timer 6 .
The switch of the timer 6 now rotates
anticlockwise to "OFF" . A beep sounds when the
set time has elapsed . The appliance does not
heat up .
24 
GB │ IE
Meaning
"Top heat"
e .g . for grilling
"Bottom heat"
e .g . for baking cakes
"Top & bottom heat"
e .g . for baking pizza
"OFF"
.
OFF

Grilling and baking

CAUTION! MATERIAL DAMAGE!
Never place any containers or food directly
onto the floor of the appliance, the heating
elements or the crumb tray 7 .
1) Place the crumb tray 7 in the appliance .
2) Remove the rack 8 and baking tray 9 from
the appliance . If required, cover these with
baking paper or grease the baking tray 9
with fat/oil that is suitable for baking .
NOTE
The oven must be pre-heated appropriate
to each dish . Refer to the guidelines in the
respective recipe . Pre-heating is useful for:
very short baking times,
crisp crusts,
delicate dishes that require a constant
temperature, such as soufflés .
If no pre-heating is required, skip step 3) .
3) Allow the appliance to heat up to the desired
temperature:
Close the glass door .
Select the required temperature using the
temperature control 2 .
Select the required function with the function
switch 4 .
Use the timer 6 to set a preheating time of
at least 15 minutes .
The red control lamp 5 indicates that the appliance
is switched on . The switch of the timer 6 now
rotates anticlockwise to the "OFF" position .
SGB 1200 B5

Quicklinks ausblenden:

Werbung

Fehlerbehebung

loading