Using The Baking Tray; Before Initial Use - Silvercrest SGB 1200 B5 Bedienungsanleitung

■ To remove the hot rack 8, hook the tongs 0
onto it as follows:
Fig . 1: Hooking the tongs 0 onto the rack 8

Using the baking tray

WARNING! RISK OF INJURY!
► Always use the tongs 0 to insert the baking
tray 9 into the appliance or to remove it .
Fig . 2: Hooking the tongs 0 onto the baking tray 9
■ Push the baking tray 9 onto one of the 2 rails 1
in the cooking chamber of the appliance .
CAUTION! MATERIAL DAMAGE!
► Never place the baking tray 9 directly onto
the heating elements .
► Do not use this baking tray 9 for storage
and processing of acidic, alkaline or salty
food .
SGB 1200 B5

Before initial use

Once the appliance is set up correctly:
1) Insert the plug into a mains power socket .
2) Turn the temperature control 2 clockwise to
the maximum temperature (to the limit stop) .
3) Turn the function switch 4 to "top and bottom
heat" .
4) Open the glass door and leave it open for this
operation .
5) Remove any installed accessories from the
cooking chamber .
6) Turn the timer 6 to 20 minutes .
NOTE
► The first time the appliance heats up, a
small amount of smoke and odour may be
generated due to production-related residue .
This is normal and is completely harmless .
Provide sufficient ventilation; for example, by
opening a window .
The appliance switches off automatically
after 20 minutes .
If you want to interrupt the heating process
prematurely, turn the temperature control 2
counter-clockwise to the limit stop and set
the function switch 4 to
timer 6 to "OFF" .
7) Allow the appliance to cool down, then clean
the appliance as described in the section
"Cleaning and care" .
The appliance is now ready for use .
and set the
OFF
GB │ IE │ 23 ■