Operating The Appliance; Function Switch; Temperature Control; Timer - Silvercrest SGB 1200 B5 Bedienungsanleitung

Operating the appliance

Function switch

You can switch on the appliance using the function
switch 4, and can also set three different functions:
Symbol
OFF
The appliance is switched off.

Temperature control

Use the temperature control 2 to set the
■
desired temperature.

Timer

User the timer 6 to set the cooking time.
Set the timer 6 to the desired cooking time.
■
The red control lamp 5 lights up. Once the set
time has elapsed, you will hear a beep and
the appliance stops heating. The red control
lamp 5 goes out.
NOTE
You can also use the timer 6 as a short-period
timer without the heating function.
Set the function switch 4 to
–
Set the desired time on the timer 6.
–
The switch of the timer 6 now rotates
anticlockwise to "OFF". A beep sounds when the
set time has elapsed. The appliance does not
heat up.
■ 8 │ GB │ IE │ NI │ CY
Meaning
"Top heat"
e.g. for grilling
"Bottom heat"
e.g. for baking cakes
"Top & bottom heat"
e.g. for baking pizza
"OFF"
.
OFF

Grilling and baking

CAUTION! MATERIAL DAMAGE!
► Never place any containers or food directly
onto the floor of the appliance, the heating
elements or the crumb tray 7.
1) Place the crumb tray 7 in the appliance.
2) Remove the rack 8 and baking tray 9 from
the appliance. If required, cover these with
baking paper or grease the baking tray 9
with fat/oil that is suitable for baking.
NOTE
► The oven must be pre-heated appropriate
to each dish. Refer to the guidelines in the
respective recipe. Pre-heating is useful for:
– very short baking times,
– crisp crusts,
– delicate dishes that require a constant
temperature, such as soufflés.
► If no pre-heating is required, skip step 3.
3) Allow the appliance to heat up to the desired
temperature:
– Close the glass door.
– Select the required temperature using the
temperature control 2.
– Select the required function with the function
switch 4.
Use the timer 6 to set a preheating time of
–
at least 15 minutes.
The red control lamp 5 indicates that the appliance
is switched on. The switch of the timer 6 now
rotates anticlockwise to the "OFF" position.
SGB 1200 B5