Operating The Appliance; Function Switch; Temperature Control; Timer - Silvercrest IAN 279291 Bedienungsanleitung

Operating the appliance

Function switch

You can switch on the appliance using the function
switch , and can also set three different functions:
Symbol
OFF
The appliance is switched off.

Temperature control

■ Use the temperature control
temperature.

Timer

Use the timer to set the cooking time.
■ Set the timer to the desired cooking time.
Once the set time has elapsed, a beep sounds
and the appliance stops heating.
NOTE
You can also use the timer
timer without the heating function.
– Set the function switch
– Set the desired time on the timer
The switch of the timer
wise to "OFF". A beep sounds when the set time
has elapsed. The appliance does not heat up.
│
■ 8 GB
Meaning
"Top heat"
e.g. for grilling
"Bottom heat"
e.g. for baking cakes
"Top & bottom heat"
e.g. for baking pizza
"OFF"
to set the desired
as a short-period
to .
OFF
.
now rotates anticlock-

Grilling and baking

CAUTION! MATERIAL DAMAGE!
► Never place any containers or food directly
onto the floor of the appliance, the heating
elements or the crumb tray
1) Place the crumb tray
2) Remove the rack
the appliance. If required, cover these with
baking paper or grease the baking tray
with fat/oil that is suitable for baking.
NOTE
► The oven must be pre-heated appropriate
to each dish. Refer to the guidelines in the
respective recipe. Pre-heating is useful for:
– very short baking times,
– crisp crusts,
– delicate dishes that require a constant
temperature, such as soufflés.
► If no pre-heating is required, skip step 3).
3) Allow the appliance to heat up until it reaches
the desired temperature (this takes about
10 minutes, depending on the temperature
setting):
– Select the desired temperature using the
temperature control
– Then select the required function using the
function switch
– Use the timer
(approx. 10 minutes).
– Close the glass door.
.
in the appliance.
and baking tray from
.
.
to set the preheat time
SGB 1200 A2