Pairing The Speaker With A Bluetooth; Music Device - Silvercrest SBLD 28 A1 Bedienungsanleitung

Pairing the speaker with a Bluetooth

Before you can use the speaker, you must pair it with a compatible
device.
®
Bluetooth
♦ Ensure that the speaker is switched off and the Bluetooth
device is switched on.
♦ Set the Bluetooth
devices. A detailed description of how to do this can be found in
the operating instructions for your Bluetooth
♦ Set the On/Off switch
speaker on and activate the Bluetooth
a beep and the operating/charging LED
red.
♦ Select SBLD 28 A1 from the list of found devices on your
Bluetooth
short beep when the connection has been successfully estab-
lished.
The operating/charging LED
resent the established Bluetooth
speaker to listen to your favourite tunes wirelessly.
NOTE
► The next time you turn on the speaker, it will connect auto-
matically to the last-connected Bluetooth
Bluetooth
to re-establish the connection to your Bluetooth® music device
manually. A detailed description of how to do this can be found
in the operating instructions for your Bluetooth
► If you want to connect the speaker to another Bluetooth
device, you must first uncouple the current Bluetooth
■ 76 │ GB
device so that it scans for other Bluetooth
®
to the ON position to turn the loud-
device to pair the two devices. You will hear a
®
does not automatically reconnect, you will have
®
®
flashes blue every 2 seconds to rep-
connection. You can now use the
®
®
®

music device

device.
®
function. You will hear
flashes blue and
device. If your
device.
®
®
device.
®
SBLD 28 A1
®
®