Handling And Operation; Pairing The Speaker With A Bluetooth - Silvercrest M SLM 5 A1 Bedienungsanleitung

Handling and operation

Pairing the speaker with a Bluetooth

NOTE
If you want to pair the loudspeaker with a Bluetooth
►
the 3 .5 mm jack socket
When using the device for the first time, proceed as follows:
Ensure that the speaker is switched off and the Bluetooth
♦
device is switched on .
Set the Bluetooth
♦
devices . A detailed description of how to do this can be found in
the operating instructions for your Bluetooth
♦ Press and hold the
speaker on . You will immediately hear a rising sequence of beeps
and the operating/charging LED
twice . Then you will hear a beep and the operating/charging
flashes alternatively orange und blue . The Bluetooth
LED
function is now activated automatically .
♦ Select the entry
Bluetooth
connect the two devices . You will hear a beep and the operating/
charging LED
connection has been successfully established .
■ 50 │ GB │ IE
device so that it scans for other Bluetooth
®
button
® device and, if required, enter the code
flashes blue every 3 seconds once the
may not be occupied .
for about 3 seconds to turn the
flashes blue and orange
from the list of found devices on your
device
®
® device,
®
® device .
to
SLM 5 A1
®
®