Charging The Speaker - Silvercrest SBLD 28 A1 Bedienungsanleitung

Charging the speaker

CAUTION
► Use the device only in dry interior rooms.
Before using the device, the integrated battery must be completely
charged.
♦ Ensure that the On/Off switch
♦ Connect the USB plug on the charger cable
a USB power supply.
♦ Connect the micro-USB plug of the charging cable
charging socket (POWER INPUT)
NOTE
► The operating/charging LED
When the battery is fully charged, the charging LED turns off.
NOTE
► Charging takes about 3 hours with a charging current of 500 mA.
When the battery is fully charged, you can play back music
for about 3 hours without lighting, or 1.5 hours with lighting at
a medium volume. The playback time may vary depending on
usage (volume/lighting).
► When the battery is dead, you will hear several beeps within a
few seconds and the operating/charging LED
The device then switches off automatically.
■ 74 │ GB
is in the OFF position.
on the device.
lights up red during charging.
to a PC or to
to the
flashes red.
SBLD 28 A1