Handling And Use; Switching The Speaker On/Off; Power Saving Mode - Silvercrest SBLD 28 A1 Bedienungsanleitung

Handling and use

This section provides you with important information on handling and
using the device.
Switching the speaker on/off
♦ Set the On/Off switch
speaker on and activate the Bluetooth
a beep and the operating/charging LED
red.
♦ Set the On/Off switch
loudspeaker off and deactivate the Bluetooth
You will hear a beep.

Power saving mode

If there is no input signal to the 3.5 mm jack
, the speaker switches automatically into power saving
®
Bluetooth
mode after 10 minutes.
The operating/charging LED
connection will be terminated.
♦ Set the On/Off switch
the ON position to exit power saving mode.
SBLD 28 A1
to the ON position to turn the loud-
®
to the OFF position to switch the
turns off and any existing Bluetooth
to the OFF position and then back to
function. You will hear
flashes blue and
function.
®
or no playback via
GB
│
®
75 ■