Pairing The Speaker With A Bluetooth ® Music Device - Silvercrest SLTR 70 A1 Bedienungsanleitung Und Sicherheitshinweise

Pairing the speaker with a Bluetooth
Before you can use the speaker for music playback via Bluetooth
pair it with a compatible external Bluetooth
♦ Press and hold the
on and activate the Bluetooth
and you will hear a beep . Then, the red LED
flash alternately .
Set the external playback device so that it scans for Bluetooth
♦
You can find a detailed description of how to do this in the operating
instructions for your external playback device .
Select the entry SLTR 70 A1 or SLTE 70 A1 from the list of found
♦
Bluetooth
device . The external playback device is now automatically connected to
the speaker via Bluetooth
nection has been successfully established and the blue LED
You can now use the speaker to listen to music from your external playback
device wirelessly . The blue LED
established Bluetooth
NOTE
► The next time you turn on the speaker, it will connect automatically to the
last­connected external playback device . If your external playback device
does not automatically reconnect to the speaker, you will have to re­estab­
lish the connection manually . You can find a detailed description of how
to do this in the operating instructions for your external playback device .
► If you want to connect the speaker to another external playback device,
you must first unpair the currently connected playback device . To do this,
press the
natively, you can disconnect via the currently connected playback device .
If the Bluetooth
►
automatically after 2 minutes if no Bluetooth
an external playback device .
As soon as you connect the AUX input
►
the Bluetooth
mode .
SLTR 70 A1 / SLTE 70 A1
button
5
® devices in the settings menu of your external playback
®
9
® connection .
button for about 2 seconds . You will hear a beep . Alter­
1
® function is activated, the speaker switches itself off
® function is deactivated and the speaker switches to AUX
®
playback device .
®
for about 2 seconds to switch the speaker
® function . The red LED
8
. You will hear a short beep when the con­
flashes every 2 seconds to indicate the
®
to the 3 .5 mm jack cable
6
music device
® , you must
flashes twice
8
and the blue LED
® devices .
lights up .
9
connection is made to
GB │ MT
9
,
q
│
45 ■