Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 64

en 64 | FWA 4650 | Installing Bluetooth adapter
7.2 Installation
7.2.1 Preparation
Ending programs
1. Start the wheel alignment unit PC/ Laptop.
2. Close the program user interface Aligner.
3. Use the right mouse key to select the program
modules Measurement server, RemoteControlEx,
ILSV server, Demo server and Licence server in the
task bar at the bottom right and end with the "Exit"
button.
Fig. 32: Server task bar
1 Measurement server
2 RemoteControlEx
3 ILSV server
4 Demo server
5 Licence server
i
Depending on program version:
4. Close any open programs.
 Programs ended.
Provision of software
i
Software Center:
1. Download the driver and copy onto a storage
medium (USB data carrier).
2. Start the storage medium on the PC/ Laptop of the
wheel alignment unit.
 Provision of software via Software Center.
i
EDIS CD:
1. Start the EDIS CD on the service engineer's PC/
Laptop, search for the driver and copy onto a storage
medium (USB data carrier).
2. Start the storage medium on the PC/ Laptop of the
wheel alignment unit.
3. Or start the EDIS CD on the PC/ Laptop of the wheel
alignment unit and use the full text search function
to find the driver.
 Provision of software via EDIS CD.
i
Driver CD:
¶
Start the driver CD on the PC/ Laptop of the wheel
alignment unit.
i
The driver CD starts automatically (Autorun).
 Provision of software via driver CD.
|
1 690 706 220 2016-09-14
7.2.2 Procedure
!
Keep to the sequence:
First install the software and the driver and then
connect the Bluetooth-USB adapter Bosch 2.0 to the
PC/ Laptop when prompted to do so.
Fig. 33: Driver CD – Bluetooth Stack for Windows by Toshiba
1. Press the Installation button or select the Set-up file.
Fig. 34: Preparation for installation – InstallShield Wizard
 The installation wizard starts up.
Robert Bosch GmbH