Package Contents; Description (Fig. A) - DeWalt DCS577 Bersetzt Von Den Originalanweisungen

Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCS577 operates on an 54 volt battery pack.
These battery packs may be used: DCB546, DCB547. Refer to
Technical Data for more information.

Package Contents

The package contains:
1 Hi-torque circular saw
1 Circular saw blade
1 Blade wrench
1 Dust extraction port
2 Dust port screws
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
WALT batteries with a
e
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 22 , which also includes the year of manufacture,
is printed into the housing.
Example:
2018 XX XX
Year of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch lock off
1
button
Trigger switch
2
Depth adjustment locking
3
lever
Lower blade guard
4
retracting lever
Foot plate
5
Lower blade guard
6
0˚ Kerf indicator
7
45˚ Kerf indicator
8
Bevel adjustment lever
9
Angle quadrant
10
Intended Use
These heavy-duty circular saws are designed for professional
wood cutting applications. DO nOT use water feed attachments
with this saw. DO nOT use abrasive wheels or blades.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty saws are professional power tools.
DO nOT cut metal, masonry, glass, masonry-type planking,
cement board, tile or plastic with this saw.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
EnGLISH
Spindle lock button
11
Main handle
12
Auxiliary handle
13
Battery release button
14
Battery
15
Coarse adjustment
16
Fine adjustment
17
Kerf indicators
18
Blade clamping screw
19
Dust extraction port
20
Wrench
21
Date code
22
43