Troubleshooting - Crivit 1-LD5029 Bedienungs- Und Sicherheitshinweise

pressing SET/LIGHT and confirm your setting by pressing SEL. Save your settings by
pressing MODE.
Sleep mode will now activate and deactivate at the same time every day.
Stopping automatic sleep mode
Press and hold SET for 3 seconds. Press SET/LIGHT to deactivate automatic sleep
mode. Confirm your setting by pressing MODE.
7-day sleep history
Press SEL while in sleep mode. The day (1-7) is shown in the upper part of the
display with the total sleep duration to the right of the day. The deep sleep duration
is shown in the lower part of the display.
Tag 1-7
To display a different day press SEL.
To exit sleep mode press MODE.

Troubleshooting

The workout timer does not start
The maximum workout time (9 hours, 59 minutes, 59 seconds) has been

reached. Reset the workout timer as described in the chapter "Workout timer".
Distance measurements are very imprecise
Incorrect stride lengths for walking and running were entered. Enter the correct

values as described in the chapter "Stride length setting".
- Total sleep duration
- Deep sleep duration
- 106 -