Stopping Manual Sleep Mode; Setting The Automatic Sleep Mode - Crivit 1-LD5029 Bedienungs- Und Sicherheitshinweise

2. Stopping manual sleep mode

Press SET to stop the manual sleep mode. Total sleep duration is shown in the upper
part of the display. Deep sleep duration is shown in the lower part of the display.
The Z Z symbol and your sleep data remains on the display
- Last sleep
recording
NOTE: Manual sleep mode has a higher priority than automatic sleep mode.

3. Setting the automatic sleep mode

Press and hold SET for 3 seconds to set automatic sleep mode. AUTO OFF/AUTO
AUS appears in the display. Press SET/LIGHT to activate the automatic sleep mode.
Confirm your setting by pressing SEL.
START / ANFANG / DEBUT / INIZIO appears in the upper part of the display and
the hours will blink in the lower part of the display. Set the hours by pressing
SET/LIGHT and confirm your setting by pressing SEL. The minutes will blink. Set the
minutes by pressing SET/LIGHT and confirm your setting by pressing SEL.
END / ENDE / FIN / FINE appears in the upper part of the display and the hours
will blink in the lower part of the display. Set the hours by pressing SET/LIGHT and
confirm your setting by pressing SEL. The minutes will blink. Set the minutes by
- 105 -