Current/Average Pace Time/Km - Crivit 1-LD5029 Bedienungs- Und Sicherheitshinweise

Press SET/LIGHT to select YES/JA/OUI/SI or NO/NEIN/NON/NO and press
SEL to confirm.
Setting YES/JA/OUI/SI will stop the heart rate measurement.
Setting NO/NEIN/NON/NO will cause the heart rate measurement to continue.
If no button is pressed during the next 30 minutes (after 3 hours total workout time)
the measurement will stop automatically.
ATTENTION: After 5.5 hours, the message will reappear.
Automatic deactivation of the workout time (in another mode)
If a different function mode is selected after starting the workout timer, after 4
minutes the display will show:
Press SET/LIGHT to select YES/JA/OUI/SI or NO/NEIN/NON/NO and press
SEL to confirm.
Setting YES/JA/OUI/SI will stop the heart rate measurement.
Setting NO/NEIN/NON/NO will cause the heart rate measurement to continue.
If no button is pressed during the next minute, the measurement will stop
automatically.

2. Current/average pace time/km

Press SEL to show the pace in the upper part of the display. The lower part of the
display will show the heart rate. Press SET to show the current or average pace.
- 98 -