Features And Scope Of Application; Features - Orbitalum GF 4 series Originalbetriebsanleitung Und Ersatzteilliste

enGLISH

Features and scope of application

4. FeATUReS AnD ScOPe OF APPLIcATIOn
4.1

Features

The pipe cutters are distinguished by the following characteristics:
• Enhanced safety due to stationary pipe – rotating tool.
• A restart inhibit function prevents the machine from starting in an uncontrolled way after it has been re-connected to the
electric mains or after the voltage supply has been re-established following a power failure.
• Self-centering clamping system.
• Low-maintenance gear with oil lubrication.
• Saw motor with RPM control and ergonomically optimized motor for more secure operator position.
• Burr-free cutting surface and deformation-free pipe cross-section.
• Cold machining process.
• Quick cutting process.
• Production of standardized welding bevels.
• Cutting of pipe elbows.
• Quick tool change.
• Plug connection with quick-disconnect coupler: for easy and comfortable replacement of the power cable. Also prevents
cables from twisting.
• Working without getting tired when cutting and beveling pipes with larger pipe dimensions and thicker walls.
• Laser beam for optically marking the cutting area (for GF 4 and GF 6 AVM/MVM only).
• Locking mechanism of the slide housing prevents unauthorized usage and theft (for GF 4 and GF AVM/MVM only).
Additional properties of the GF 4 AVM, GF 6 AVM, RA 8 AVM or RA 12 AVM:
• The intelligent control system of the AVM monitors the feed force continuously depending on the torque and the parameter
settings.
• The operator position guarantees the best possible protection against hot chips flying around.
• Advancing the pipe cutter in a usual way by operating the handle of the pipe cutter motor is always possible (e.g. when cutting
thin-walled pipes).
68
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
GF 4, GF 6, RA 8, RA 12 (AVM/MVM)
[REV. 20190510] OC_GF_RA_BA_790142765_00__INH-02_EN