Transport; Transporting The Pipe Cutter - Orbitalum GF 4 series Originalbetriebsanleitung Und Ersatzteilliste

enGLISH
Storage and transport
7.2

Transport

DAnGeR!
WARnInG!
WARnInG!
7.2.1

Transporting the pipe cutter

1. Loosen the hexagon bolt (1) on the quick-mounting plate.
2. Guide suitable transport straps through the pipe cutter slide housing.
3. Carefully lift the cutter at the straps and insert in the assembled quick-mounting plate on the side.
4. Bolt the pipe cutter securely in place on the mounting plate with the hexagon bolt (1).
76
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Fatal electric shock!
X Before transportation or changing the workplace, switch off the machine, wait until the
machine/tool stops running and pull the mains plug.
During transportation, the On/OFF switch may unintentionally be activated
causing the machine to start up!
Diverse physical injuries and material damage.
X Before transportation or changing the workplace, switch off the machine, wait until the
machine/tool stops running and pull the mains plug.
Heavy weight when transporting the pipe cutters!
Danger of being injured through overstraining.
X Transport pipe cutters over long stretches with corresponding lifting aids.
GF 4, GF 6, RA 8, RA 12 (AVM/MVM)
1
[REV. 20190510] OC_GF_RA_BA_790142765_00__INH-02_EN