Storage And Transport; Storage; Position Of The Cutter In The Transport Case - Orbitalum GF 4 series Originalbetriebsanleitung Und Ersatzteilliste

GF 4, GF 6, RA 8, RA 12 (AVM/MVM)
7.

STORAGe AnD TRAnSPORT

7.1

Storage

ATTenTIOn!
nOTe!
7.1.1

Position of the cutter in the transport case

The pipe cutter is stored securely in the transport crate and can only be taken from the crate with suitable lifting aids (see chap.
7.2, p. 76). For the GF 4 and GF 6 (AVM/MVM) the 2 wooden struts (1) must first be removed from the crate.
GF 4 (AVM/MVM)
For the GF 6 (AVM/MVM) the frame of the transport crate can be removed by loosening the 4 screws left and right below at the
two long sides of the crate (see arrows).
nOTe!
GF 6 (AVM/MVM) in transport crate with frame
[REV. 20190510] OC_GF_RA_BA_790142765_00__INH-02_EN
Incorrect machine storage!
Diverse physical injuries and material damage.
X Store the machine in its original crate in a dry environment.
For GF 4, GF 6, RA 8 or RA 12 with AVM/MVM: The automatic and manual feed module AVM/
MVM is already fitted to the pipe cutter upon delivery.
1
The accessories in the GF 6 (AVM/MVM) must be taken out of the transportation case before
the frame is removed.
Storage and transport
RA 8, RA 12 (AVM/MVM)
GF 6 (AVM/MVM) without frame
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
enGLISH
75