The Following Must Be Observed - Aventics AS-i Betriebsanleitung

General instructions
During assembly
AVENTICS | AS-i | R499050017–BDL–001–AE
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.
2.4

The following must be observed

Observe the regulations for accident prevention and
W
environmental protection for the country where the device is
used and at the workplace.
Do not change or modify the device.
W
Only use the device within the performance range provided
W
in the technical data.
Do not place any mechanical loads on the device under any
W
circumstances. Do not place any objects on it.
This device may only be used for industrial applications
W
(class A). An individual license must be obtained from the
authorities or an inspection center for systems that are to be
used in a residential area (residential, business, and
commercial areas). In Germany, these individual licenses
are issued by the Regulating Agency for
Telecommunications and Post (Regulierungsbehörde für
Telekommunikation und Post Reg TP).
Ensure that the power supply is within the stipulated
W
tolerance for the modules.
Observe the safety notes found in your valve system's
W
operating instructions.
A 24 V power pack supplies all components with electricity.
W
The power pack must be fitted with a safe isolation in
accordance with DIN EN 60742, VDE 0551 classification.
This ensures that the electric circuits comply with SELV/
PELV electric circuits in accordance with IEC 60364-4-41.
Switch off the operating voltage before connecting or
W
disconnecting plugs.
The warranty only applies to the delivered configuration.
W
The warranty will not apply if the system is incorrectly
assembled or manipulated.
Make sure the relevant system component is not under
W
51
For your safety