Safety Instructions - DeWalt DW713 Bedienungsanleitung

EN G LI S H
MITRE SAW DW713, DW713XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Power input
Blade diameter
Max. blade speed
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 89 mm
Resulting height at max. width 162 mm
45° mitre
Resulting width at max. height 89 mm
Resulting height at max. width 114 mm
45° bevel
Resulting width at max. height 61 mm
Resulting height at max. width 161 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 133 mm
Automatic blade brake time
Weight
* DW713XPS with Worklight LED
L (sound pressure)
pA
L (acoustic power)
WA
K (sound pressure uncertainty K)
pA
K (acoustic power uncertainty K)
WA
Vibration total values (triax vector sum)
determined according to EN61029:
Vibration emission value a
h
a =
h
Uncertainty K =
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
26
WALT one of the most
E
DW713/DW713XPS
V 230
V 230/115
W 1,600
mm 250
min 5,000
-1
mm 162
mm 114
mm 90
mm 58
left 50°
right 50°
left 48°
right 48°
mm 95
mm 41
mm 67
mm 41
mm 95
mm 25
mm 20
s < 10.0
kg 14.8*
dB(A) 91
dB(A) 102
dB(A) 3.0
dB(A) 3.0
m/s² 3.4
m/s² 1.5
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
CAUTION: Used without the safety alert symbol indicates
a potentially hazardous situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DW713/DW713XPS
D WALT declares that these products, described under "technical data"
E
have been designed in compliance with:
98/37/EC (until Dec.28,2009); 2006/42/EC (from Dec.29,2009);
2004/108/EC; 2006/95/EC; EN 61029-1:2000 + A11:2003 +
A12:2003; EN 61029-2-9:2002; EN 55014-1; EN 55014-2;
EN 61000-3-2; EN 61000-3-3.
For more information, please contact D
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
10.10.07

Safety Instructions

WARNING! When using electric tools basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury
including the following.
Read all these instructions before attempting to operate this product
and save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
General Safety Rules
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the tool in damp or wet
conditions. Keep the work area well lit (250 - 300 Lux). Do not use
the tool where there is a risk of causing fire or explosion, e.g., in the
presence of flammable liquids and gases.
3. Guard against electric shock.
Avoid body contact with earthed surfaces (e.g., pipes, radiators,
cookers and refrigerators). When using the tool under extreme
conditions (e.g., high humidity, when metal swarf is being
produced, etc.), electric safety can be improved by inserting an
isolating transformer or a (FI) earth-leakage circuit-breaker.
4. Keep other persons away.
Do not let persons, especially children, not involved in the work,
touch the tool or the extension cord and keep them away from the
work area.
WALT at the following address
E
WALT.
E