Technical Data; English (Original Instructions) - DeWalt DCS380 Bersetzung Der Originalanweisungen

CORDLESS RECIPROCATING SABRE SAW
DCS380
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
Cutting capacity in wood/metal profiles/
plastic tubes
Stroke length
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
While cutting board
Vibration emission value a =
h,B
Uncertainty K =
While cutting wooden beam
Vibration emission value a =
h,WB
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC-Declaration of Conformity
WALT one of the Machinery Directive
e
Cordless Reciprocating Sabre Saw
DCS380
DCS380
V 18
DC
D
2
Technical Data are in compliance with:
Li-Ion
2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.
min 2950
-1
These products also comply with Directive 2014/30/EU and
mm 300/130/160
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
mm 28.6
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
kg 2.7
dB(A) 88
dB(A) 99
Markus Rompel
dB(A) 3
Vice-President Engineering, PTE-Europe
D
D-65510, Idstein, Germany
20.12.2019
m/s 2 31
m/s 2 8.1
Definitions: Safety Guidelines
m/s 2 33
m/s 2 6.6 The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.





WALT declares that these products described under
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EngLIsh
WALT at
e
WALT.
e
25