Trouble Shooting - Parkside PLSA 40-Li A1 Originalbetriebsanleitung

GB IE

Trouble shooting

Problem
Device does not
start
Device works
with interrup-
tions
Weak or
no suction/
blowing power
Impeller does
not move
40
Possible cause
Battery discharged (
Battery ( 5) not inserted
On/off switch (
Defective motor
Suction pipes (
tion bag
Internal loose contact
On/off switch (
Low battery power
Collection bag (
Collection bag (
Impeller or blowpipe (
or suction pipe (
or blocked
Foreign body blocking the impeller
Corrective action
Charge the battery
5)
(see "Charging the battery")
Insert the battery
(see "Inserting/removing the
battery")
4) is defective
Repair by Service Centre
16) and collec-
See the section on "Initial use"
Repair by Customer Care
4) is defective
Charge battery (
(see "Charging the battery")
15) is full Empty collection bag
15) is dirty Clean collection bag
9) and/
see chapter "Removing obstruc-
16) is clogged
tions and blockages"
Remove the blockage (see "Remo-
ving obstructions and blockages")
5)