Herunterladen Diese Seite drucken

Maintenance And Storage - Parkside PLSA 40-Li A1 Originalbetriebsanleitung

Akku-laubsauger/-bläser
Vorschau ausblenden Andere Handbücher für PLSA 40-Li A1:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
or shields, or without safety
equipment, e.g. without the coll-
ection bag being connected.
• Keep the power source free of
refuse or other accumulated
material to prevent it from beco-
ming damaged and to avoid a
potential fire.
• Do not transport the machine
while the power source is run-
ning.
• If the cutting mechanism co-
mes into contact with a foreign
object or the machine starts to
emit unusual noises or vibrate,
immediately turn off the power
source and wait for the machine
to come to a standstill. Discon-
nect the machine from the mains
supply or remove the batteries
and perform the following steps
before re-starting and operating
the machine:
- investigate for damage;
- replace or repair damaged
parts;
- check for loose parts and tigh-
ten as necessary.
• Ensure that you do not touch any
of the dangerous moving parts
before you have unplugged the
machine from the mains supply
or removed the batteries from
the machine, and that the dan-
gerous moving parts have come
to a complete standstill.
In the case of an acci-
dent or malfunction during
operation, the device must
be switched off immedia-
tely. Injuries must be pro-
perly treated or medical
assistance sought. Read the
"Troubleshooting" section to cor-
rect any malfunctions or contact
our Service Centre.

Maintenance and storage:

• Regularly check the functionality
and integrity of the device to
avoid danger to the operator.
• Replace worn or damaged parts
in the interests of safety. Only
use original replacement parts
and accessories.
• Do not try to repair the device
yourself, unless you have profes-
sional training. All work not men-
tioned in these instructions may
only be performed by authorised
service representatives commissi-
oned by us.
• Store the device in a dry place
and out of reach of children.
• Treat your device with care.
Clean the ventilation slits regu-
larly and follow the maintenance
instructions.
• Keep all inlets for the cooling air
free of debris.
• Do not use the device if the
switch cannot be turned on and
off. Damaged switches must be
replaced at a customer service
workshop. Do not overload your
device. Only work within the
power range indicated. Do not
use low-performance machines
for heavy work. Do not use the
device for purposes for which it
is not intended.
• If you stop the machine for main-
tenance, inspection, storage or
to change accessories, switch off
the power source, disconnect the
machine from the mains supply
or remove the batteries, and en-
GB
IE
31

Werbung

loading