Additional Safety Instructions; Residual Risk - Parkside PLSA 40-Li A1 Originalbetriebsanleitung

GB IE
sure that all moving parts have
come to a standstill. Allow the
machine to cool down before in-
spection, changing settings etc.
Maintain the machine with care
and keep it clean.
• Always allow the machine to
cool down before storage.
• Be aware that the shredding ma-
chine can always still move even
if the power source is switched
off by the locking function of the
protective equipment. Be aware
of this when maintaining the
shredding machine.
• Never try to circumvent the lo-
cking function of the protective
equipment.

Additional safety instructions:

• After they have been joined to-
gether, the blowpipes cannot be
taken apart again!
• Remove the batteries before ins-
talling or removing the collection
bag.
Observe the safety in-
formation and notes on
charging and proper use
as shown in the instruc-
tion manual for your
battery and charger
from the Parkside X 20
V Team series.
Recommendation:
• Avoid operating the machine in
poor weather conditions, espe-
cially when there is a lightning
hazard.
32

RESIDUAL RISK

Even if properly operating and
handling this electric tool, some resi-
dual risks will remain. Due to its con-
struction and build, this electric tool
may present the following hazards:
a) Ear damage if working without
ear protection.
b) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
c) Lung damage, if suitable respira-
tory protection is not worn.
d) Eye injuries if no suitable eye
protection is worn.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, users who wear medi-
cal implants must consult their
doctor and the manufacturer
of the implant before opera-
ting the machine.