Tractor Disengagement - Peruzzo PANTHER MULTIFIT series Handbuch Zum Betrieb Und Zur Wartung

Tractor disengagement

5.5.
Detachment from the machine must be carried out resting it on flat and solid ground, with the tractor engine switched off,
the ignition key disengaged, the parking brake engaged, the gear engaged and power take-off disabled
Proceed as follows:
gradually lower the three-point linkage of the tractor until the machine is resting on the ground. Never put it on the ground
-
abruptly.
- make sure that the pressure of the pipes has been released.
- disconnect the hydraulic hoses from the tractor couplings.
- release the cardan shaft from the tractor.
- detach the three-point linkage.
- disconnect the connection pins to the lifting bars.
- After checking that all the parts have been disconnected from the tractor bars, move the tractor forward until the machine is
completely separated from the tractor.
Code. 29050071
Release 01/08/2017 38
.