Peruzzo PANTHER MULTIFIT series Handbuch Zum Betrieb Und Zur Wartung Seite 31

PTO rotation speed.
Make sure the machine has
stopped: danger of shearing
hands. Do not remove the
safety guards before stopping
the machine.
Check regularly the
tightening of the belts
tranmission.
It is recommended that both the nameplate and the warning symbols are always clean and in good condition; if necessary, they
must be replaced with other originals by requesting them from the manufacturer.
The new symbols should be applied in the same position as the old ones.
Read the
IMPORTANT labels
before operating
the machine.
31
Greasing
Attachment point for lifting.
Cutting hazard. Do not insert your
hands
ALWAYS wear the
Individual Protective
Devices.
Counter blade adjustment
Code. 29050071
PANTHER MULTIFIT
points.
Release 01/08/2017