Declaration Of Conformity - EdilKamin SIDE series Installations-, Betriebs- Und Wartungsanleitung

Dear Sir/Madam,
Congratulations and thank you for choosing our product.
Please read this document carefully before you use this product in order to obtain the best performance in complete safety.
For further details or assistance, please contact the DEALER where you purchased the product or visit our website
www.edilkamin.com. and click on DEALERS.
NOTE
- After having unpacked the boiler-fi replace, ensure that its contents are complete and intact ("cold hand" handle, guarantee
booklet, glove, technical data sheet/CD).
In case of anomalies please contact the dealer where you purchased the product immediately.
You will need to present a copy of the warranty booklet and valid proof of purchase.
Commissioning/ testing
Commissioning and testing must be performed by the DEALER. Failure to do so will void the warranty.
Commissioning, as specifi ed in standard UNI 10683 Rev. 2005 (section "3.21") consists in a series inspections to be performed
with the fi replace installed in order to ascertain the correct operation of the system and its compliance to applicable regulations.
The nearest Assistance Centre can be found by telephoning the freephone number or by visiting the site www.edilkamin.com.
- Incorrect installation, incorrect maintenance, or improper use of the product, shall relieve the manufacturer from any damage
resulting from the use of this product.
- the proof of purchase tag, necessary for identifying the boiler-fi replace, is located:
- on the top of the package
- in the warranty booklet found inside the fi rebox
- on the nameplate affi xed on the right side of the device;
This documentation must be saved for identifi cation together with the valid proof of purchase receipt. The data contained therein
must be reported when requesting information and made available should servicing be required;
- N.B.: The drawings and fi gures are graphically and geometrically indicative, and although referring to the model Side 50x50,
they also represent a schematic diagram for models Side 2 and Side 3.

DECLARATION OF CONFORMITY

The undersigned EDILKAMIN S.p.a. with head offi ce headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - tax code and
VAT no. 00192220192
Declares under its own responsability as follows:
The wood burning fi replaces specifi ed below are in accordance with the 89/106/EEC (Construction Products)
WOOD BURNING FIREPLACES, trademark EDILKAMIN, called SIDE 50X50, SIDE 2, SIDE 3
SERIAL NUMBER: Ref. Data nameplate YEAR OF MANUFACTURE: Ref. Data nameplate
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
UNI EN 13229:2006
Also declares as follows:
the wood burning fi replaces SIDE 50x50, SIDE 2, SIDE 3 are in compliance with the requirements of the European directives:
2006/95/EEC - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive
EDILKAMIN S.p.a. will decline all responsability of malfunctioning or damage to the equipment in case of unauthorized substitu-
tion, assembly or modifi cations of any sort on the said equipment on the part of non-EDILKAMIN personnel.
- 15
-