Safety Information; Declaration Of Conformity - EdilKamin PELLBOX SCF Installations-, Betriebs- Und Wartungsanleitung

PELLBOX SCF SPECIFICATIONS
Dear Sir or Madam,
thank you for choosing our Pellbox SCF.
Before using your insert, please read this booklet carefully: it explains how to get the most from all its features in complete safety.
Please remember that the 1st ignition must be carried out by the DEALER, which verifies the installation and completes the guarantee.
The manufacturer cannot be held liable for any damage which may derive from using the insert after incorrect installation, incorrect
maintenance or misuse.

SAFETY INFORMATION

• The PELLBOX SCF insert is designed to heat the room it is installed in by radiation and by air movement from the
front grilles. It may also heat an adjoining room by air movement from an outlet found on the right side panel. The heat
is generated by automatic wood pellets combustion in the firebox.
• The only risks which may derive from use of the insert are linked with non-compliance with the installation instruc-
tions, direct contact with live electrical parts (inside) or with the fire or hot parts (glass, pipes and hot air outlet), and the
introduction of foreign substances. Only use pellets as fuel in the firebox.
• If components fail, the insert is fitted with safety devices which shut it down. This must be allowed to happen without
interference.
• For correct operation, the insert must be installed in compliance with the instructions on page 22 and the door must not
be opened during operation: combustion is managed automatically so no manual operations are needed.
• Never put foreign substances in the firebox or hopper.
• Do not use flammable products to clean the smoke ducts.
• Firebox and hopper components must only be cleaned using a vacuum cleaner.
• The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth. Do not clean when hot.
• Make sure the insert is installed and ignited by a qualified DEALER, which must also complete the guarantee and take
responsibility for correct installation.
• During insert operation, the outlet pipes and door reach high temperatures.
• Do not keep objects that are not able to withstand heat in the immediate vicinity of the insert.
• NEVER use liquid fuels to light the insert or rekindle embers.
• Do not block ventilation openings in the room where the insert is installed or air inlets in the insert itself.
• Do not get the insert wet, and do not put wet hands near electrical parts.
• Do not fit reducers on the smoke outlet pipes.
• The insert must be installed in a suitable place as regards fire safety, and provided with all the facilities (power supply
and outlets) it requires for correct safe operation.

DECLARATION OF CONFORMITY

The undersigned EDILKAMIN S.p.A. with registered office at Via Vincenzo Monti 47n - Fiscal codes P.IVA 00192220192
Declares under its own responsibility as follows:
the wood pellet stove specifi ed below is manufactured in accordance with the 89/106/EEC Directive (Construction Products)
PELLET STOVE, trademark EDILKAMIN, called PELLBOX
MODEL: JUNIOR SERIAL NO.: Ref. data tag plate
YEAR OF PRODUCTION: Ref. data tag plate
Compliance with the 89/106/EEC Directive is also determined by compliance with the European standard:
EN 14785:2006
The undersigned also declares as follows:
the PELLBOX wood pellet stove complies with the requirements of the following European directives:
2006/95/CEE - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive
EDILKAMIN S.p.a. declines all responsibility for malfunction of the equipment in the event of substitution, assembly and/or
alterations of any sort carried out by personnel not working for or authorised by EDILKAMIN .
18