Herunterladen Inhalt Inhalt Diese Seite drucken

Declaration Of Conformity - EdilKamin PELLET-BLOK Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 78
Dear Sir/Madam
Congratulations and thank you for choosing our product.
Please read this document carefully before you use this product in order to obtain the best performance in complete
safety.
For further details or assistance, please contact the DEALER where you purchased the product or visit the TECHNI-
CAL ASSISTANCE CENTRES page on our website www.edilkamin.com.
NOTE
- After you remove the packaging, please inspect the unit for any damage or missing parts (remote control,cold handle,
warranty booklet, glove, CD/technical data sheet, spatula, desiccant).
In case of anomalies please contact the dealer where you purchased the product immediately.
You will need to present a copy of the warranty booklet and valid proof of purchase.
- Verify correct operation before completing encasement.
- Commissioning/ testing
Commissioning and testing must be performed by an authorized Edilkamin Technical Assistance Centre. Failure to do
so will void the warranty. Commissioning, as specified in standard UNI 10683 Rev. 2005 (section "3.2") consists in a
series inspections to be performed with the fireplace installed in order to ascertain the correct operation of the system
and its compliance to applicable regulations.
- Incorrect installation, incorrect maintenance, or improper use of the product, shall relieve the manufacturer from any
damage resulting from the use of this product.
- the proof of purchase tag, necessary for identifying the fireplace, is located:
- on the top of the package
- in the warranty booklet found inside the firebox
- on the nameplate affixed on the front, bottom part of the device (under "Guarantee");
This documentation must be saved for identification together with the valid proof of purchase receipt. The data contai-
ned therein must be reported when requesting information and made available should servicing be required;
- All images are for illustration purposes only; actual products may vary.

DECLARATION OF CONFORMITY

The undersigned EDILKAMIN S.p.a. with head office headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT IT00192220192
Declares under its own responsability as follows:
The pellet-burning fireplace conforms to Directive 89/106/CEE (Construction Products)
PELLET-BURNING FIREPLACE, an EDILKAMIN trademark, called PELLET-BLOK
Year of manufacture:
Serial number:
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
UNI EN 14785:2006
the PELLET-BLOK pellet-burning fireplace conforms to the requirements set out in the European Directives:
2006/95/EEC - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive
EDILKAMIN S.p.a. will decline all responsability of malfunctioning or damage to the equipment in case of unauthorized
substitution, assembly or modifications of any sort on the said equipment on the part of non-EDILKAMIN personnel.
Ref. Data nameplate
Ref. Data nameplate
21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis