Werbung
74
Hinweise zur
elektromagnetischen
Verträglichkeit (EMV)
The TELE PACK X LED model TP 100 is intended for use in an electromagnetic environment in which the RF disturbances are controlled. The user of the
device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the device, according to the power output of the communications equipment as recommended below.
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection by structures, objects and
people.
Information on
electromagnetic
D
D
0.12
0.38
1.2
3.8
12
[ ]
F
0.12
0.23
0.38
0.73
1.2
2.3
3.8
7.3
12
23
in meters [m] can be estimated using the
Werbung
