Weatherdock easyTRX2S Handbuch Seite 79

• ALERT
This LED flashes if a ship enters the defined CPA (Closest point of
approach) radius, an AIS S.A.R.T alert is received or your anchor
alarm is activated
• ERROR
This LED is illuminated if there is an error. They cause may be the
antenna or e.g. a hardware error. Use to Programming tool for
more precise error analysis.
• SAFETY.
This LED flashes if a safety message is transmitted.
• WARNING
The warning LED flashes if e.g. for a longer period of time no GPS
data has been received. This LED is also on if the device is in
„Silent Mode", i.e. pure receiving mode.
• RX ONLY
This LED flashes together with the warning LED, provided that the
easyTRX2S-IS_Wifi is in pure receiving mode or "silent mode".
• AIS TX
This LED flashes each time when the device has sent an AIS
message.
• AIS RX
This LED flashes each time when an AIS message is received.
• All OK
This LED is illuminated permanently if all functions work
properly.
Weatherdock AG Sigmundstraße 180
Tel.: +49 911 376638 30
D-90431 Nürnberg
www.weatherdock.de
Page 79 of 131