Table Of Care Measures; Maintenance Table - HUPFER SGR Betriebsanleitung

Care and Maintenance
Notes on Care and Maintenance Measures
7.3.1

Table of care measures

Care and inspection measures
Top and bottom of the belt
Surface of the conveyor system
Cleaning drawer and scraper
Impurities between rollers and the belt
7.3.2

Maintenance table

To ensure a long-lasting lifetime of the conveyor system, the regular maintenance is required. Appeared
faults or damages should be immediately eliminated.
Maintenance measures
Visual inspection of the conveyor system for mechanical
damages
Belt between the rollers and the belt for impurities
Visual inspection of the electrical installation
Connecting cable and mains plug for mechanical damages
Protective earth conductor
Function of the main switch
Function of the Emergency stop button
Engine box and deflection box
Function of the mechanical parts
Belt for damages and wear
Belt tension
Bearing of the drive and deflection side
Function of the limit switch
Function of the conveyor rollers
Chain tension
Chain
1
x = every 6 months
4330053_A5
Action
clean x
x
clean
clean x
remove
Action
perform
check
perform
check
check
check
check
clean
check
check
check
check
check
check
check
lubricate
Chapter 7
Page 27
x
x
x
1
x
1
x
1
x
x
x
x
x
x
x
x
x
x
x
x
Belt Conveyor System
SGR | SPV