Operation; Arrangement And Function Of The Operating Elements - HUPFER SGR Betriebsanleitung

Chapter 5
Page 22
5

Operation

ATTENTION
ATTENTION
5.1

Arrangement and Function of the Operating Elements

Figure 5
1 Main switch (SGR only)
3 Start button
5 Emergency stop button
Position digit
1
2
3
4
5
6
Belt Conveyor System
SGR | SPV
Rotating machine parts
There is a risk of crush injuries and injuries caused by being pulled into the
appliance.
Never catch the running belt during operation.
Belt can restart
There is a risk of injuries and damages to property.
Before switching on the conveyor system make sure there no risk of
reactivation of the belt.
Operating elements
Operating element
Main switch (SGR only)
Stop button
Start button
Potentiometer
Emergency stop button
Switch for reverse mode (option, SPV only)
Arrangement and Function of the Operating Elements
2 Stop button
4 Potentiometer
6 Switch for reverse mode (option, SPV only)
Function
Switches the conveyor system on.
Stops the conveyor system if needed.
Starts the conveyor system.
Controls the speed of the belt:
V min = 4m/min
V max = 20m/min.
Is used to switch off quickly the appliance in case of
emergency. If you have pressed the Emergency
stop button, the power supply will be disconnected.
Switches on the reverse mode of the belt.
Operation
4330053_A5