Technical Data - HUPFER SGR Betriebsanleitung

Description and Technical Data

Technical Data

3.5 Technical Data
SGR | SPV
Structure length
(min/max)
Conveyor length
(min/max)
Width
Total height
Weight
Number of legs
Belt width
Motor power
Protection class of motor
Speed range
Switch box / Protection
class
Switch box
Electrical connection
Types of sockets
Power consumption
(without sockets)
Operating and ambient
conditions
The corresponding test marks can be found on our home page at www.hupfer.de.
4330053_A5
Value Dimension
118 to 472''
in (mm)
(3000 to 12000)
100 to 455''
in (mm)
(2550 to 11550)
20'' (500)
in (mm)
35'' (900)
in (mm)
approx. 20 kg/m
3 to 6 Pc.
12'' (300)
in (mm)
0.25 kW
IP 55
13 to 65 ft/min
(4 to 20) (m/min)
IP 65
230/400 V
230 V Schuko®
230 V CEE
400 V CEE 16 A
400 V CEE 32A
0.28 kW
41 to 131 °F (˚C)
(+5 to +55)
Note
The real structure length is calculated from the
structure length minus 10'' (250 mm) at the input
area and 10'' (250 mm) at the output area.
plus 85 kg (control and drive)
depending on the length of the conveyor system
Bevelled gear drive motor with frequency converter
fitted outside (FUG)
Thermal class F, protect against overheating by
thermal contact switch
continuous setting
Plastic switch cabinet, sizes: SPV cold distribution,
SPV I, SPV II and SPV III depending on quantity of
sockets and electrical variations
AC, 3Ph NPE 50 Hz
Basic construction without sockets
The total power of the belt systems without sockets
depends on the type and number of consumers.
Basically, 3.6 kW per socket, but depending on the
cross section and as a result protection of the supply
line in connection with the load diversity factor.
Chapter 3
Page 15
Belt Conveyor System
SGR | SPV