Connectors On The Junction Box - Motorola MTM800 FuG ET Installationshandbuch

70 | Radio Installation

Connectors on the Junction Box

Figure 39: Connectors on the Junction Box – Front Panel
7
6 5 4
3
2
7
6 5 4
3 2 1
Connectors on the Junction Box - Front Panel
1= Connecting cable from Junc-
tion Box to MTM5200/
MTM5400/MTM800 FuG (rear
side 26-pin accessory connector)
for installation purpose only.
PMKN4101_ (length 6 m)
PMKN4102_ (length 4 m)
PMKN4103_ (length 2 m)
Caution: PIN 4: Use an adapter between the radio and the accessory connector to short the ignition to
ground. Interference can cause radio to hang.
Send Feedback | | 68015000584-J
3 2 1
1
2 = Connector for accessory ter-
minal
pin 1 SPEAKER +
pin 2 SPEAKER -
pin 3 EXT_PTT
pin 4 IGNITION SENSE
pin 5 EXT_ALARM
pin 6 EMERGENCY
pin 7
3 = Visor Microphone connector
PMMN4087_ or GMMN4065_