Ignition Sense Cables - Motorola MTM800 FuG ET Installationshandbuch

36 | Vehicle Preparation
Figure 3: Accessory Plug
25
26
Caution: If the ignition line is not used, it MUST be grounded. Interference can cause radio to hang.
Note:
The terminal accepts a 12 volt or 24 volt input for the Ignition Sense line. For 24 volt installations
convert the main supply from 24 to 12 volts. For information see
Installation on page
Alfatronix LTD UK. Some models are also available through Motorola Radio Aftermarket and
Accessory Division (AAD), check with your Account Manager.
The ignition sense cable kit contains a thin cable and a fuse holder.

Ignition Sense Cables

Table 43: Ignition Sense Cables
Number
PMKN4120_
6580283E02
Send Feedback | | 68015000584-J
31. Motorola recommends a suitable range of DC/DC converters available from
Description
Ignition Sense Cable with fuse 4 A
Fuse 4 A for Ignition Sense Cable
1
2
General Guidelines for Radio
Rating
Ignition Sense Cable, Length: 3 m