Powering On The Radio; Unlocking Your Radio - Motorola MTM800 E Ausführliche Bedienungsanleitung

24 | Getting Started
Icon
Related Links
Air Encryption on page 68

Powering On the Radio

Procedure:
1 Press and hold O
N
2 Your radio performs a self-check and registration routine.
3 After successful registration, your radio is in service.
Note: Your radio powers on without visible and audible notification if Covert Mode is activated.

Unlocking Your Radio

Your radio may be locked at power up. To unlock it after powering on, enter the code at the prompt. Your radio enters
the default home display.
Note: The unlock code is originally set to 0000. Your service provider may change this number before you
receive your radio.
Send Feedback | |
Description
WAP Message Expiration — Displayed next to the expiry date in the message list view.
WAP Message Title Icon — Displayed next to the title along with the text in the message
list view.
Keys Locked — Indicates that keys are locked.
Non Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available when the radio:
• Is in the Local Site Trunking Mode.
• Attempts to connect to a gateway.
Not Secured Call — Air Encryption Unavailable
Alternately blinking, indicates that Air Encryption is not available when the radio:
• Is in TMO Mode.
• Communicates through a gateway.
Not Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available in DMO Mode. The icon appears
after the PTT button is pressed.
Remote Control
Indicates that the radio is being remotely controlled and some commands are being
executed in the background. For example, when the radio is controlled via special SDS
messages or triggered to send a GPS location report.
button.