76 | Radio Installation
2 Ground the radio housing to the nearest vehicle chassis ground point, which can be done by removing the paint
from the trunnion where the radio and vehicle chassis touches the trunnion, or use a short cable with ring lugs in
both end and connect this to chassis under the wing screw.
Figure 46: Terminal into High Profile Trunnion (GLN7317_)
1
Number
1
2
Send Feedback
| | 68015000584-J
1
2
Description
Wing screws (0302637Y01), wing screws are included in Trunnion
Mount Kit.
Trunnion — main part, Part Number. GLN7317_