Husqvarna TE 250 2008-I.E. Merkmale, Gebrauch, Wartung Seite 191

Cap11a_GB 9-07-2007 16:33
Pull the lamp (3) inside, turn it counterclockwise then remove
it from the lamp holder.
After replacement, reverse operations for reassembly.
NOTES: make sure not to tighten the screws
excessively.
Pagina 89
REPLACING THE NUMBER PLATE LAMP
(TE- SMR)
Pull out the number plate lampholder (4) from the back of the
vehicle. Pull out the lampholder and the bulb. Rotate the bulb
(5) to remove from the lampholder.
Once the bulb has been replaced, reverse the above procedure.
4
5
89