Husqvarna TE 250 2008-I.E. Merkmale, Gebrauch, Wartung Seite 127

Cap5_GB 12-07-2007 10:03
ENGINE START (TXC)
Make sure the fuel tap is in the OPEN position, then shift gear
pedal in neutral position.
Pull the starter knob (BLACK knob (2) for cold starting*, RED
knob (3) for warm starting), pull the clutch control lever,
then press the engine start button (1).
Release the clutch control lever.
*: after a prolonged inactivity of the motorcycle or in presence
of a low external temperature.
2
3
Pagina 25
TXC
STARTING DECOMPRESSOR
Though the engine is provided with an automatic decompressor,
can be necessary, in some cases (carburetor flooding or starting
difficulties due to a battery inadequate charge), to use the man-
ual starting decompressor on the L.H. side of the handlebar. In
these cases, pull the lever (5) whilst simultaneously pressing
the starter button, release the lever (5) keeping the button
pressed and afterwards release the latter as well.
In order to adjust the lever decompressor free play (approximately
3 mm- 0.12 in.), the lever holder is provided with the adjuster (6);
the adjustment can be also effected with the tightener (7) on the
R.H. side of the engine (use this tightener if it is not possible to ob-
tain the correct free play with the adjuster on the handlebar).
1
25