Husqvarna TE 250 2008-I.E. Merkmale, Gebrauch, Wartung Seite 164

Cap9_GB 19-07-2007 10:51
To replace the fluid, proceed as follows:
- Remove the rubber cap on the bleeding valve (1) or (1A).
- Attach a clear plastic hose to the bleeding valve on the brake
caliper and turn the other end of the hose into a container.
- Remove fluid reservoir cap (2)or (2A: 21 mm wrench) and
the rubber.
- Loosen bleeding valve on the brake caliper.
62
Pagina 62
TE-TC-TXC
SMR