Cap6_GB
9-07-2007
16:09
ADJUSTING THE VALVE PLAY
To check the valve clearance, proceed as follows , WITH COLD
ENGINE:
First turn counterclockwise fastening rear pin (1) then remove
the saddle.
2
3
36
Pagina 36
HOW TO REMOVE THE TANK (TC-TXC)
Close the fuel tap (2) and loosen the strap (3) on the connect-
ing pipe to the carburettor, pull the pipe out of the carburettor.
Remove the screws (4) and the side panels.
Remove the locking screw (A) and pull out the tank with its
conveyors.
4
A