Husqvarna TE 250 2008-I.E. Merkmale, Gebrauch, Wartung Seite 131

Cap5_GB 9-07-2007 16:25
HOT START (TC-TXC)
If it is a problem to start the engine when hot, or following a
fall, proceed as follows:
1) the transmission (1) should be placed in neutral;
2) pull the RED knob of the starter (2);
1
TC
2
Pagina 29
3) pull the clutch lever (3);
4) push the kick-starter pedal (5) to start the vehicle.
TXC
TC
5) Then release the clutch lever (3).
BEFORE MOVING OFF, DEACTIVATE THE RED
KNOB (2) OF THE STARTER ON THE CARBURET-
TOR.
4
29